AEMC paves way for stand alone systems to replace poles and wires

RenewEconomy

In a landmark development, Australia’s principal energy rule-maker has paved the way for network operators to sever the network ties to remote customers, and deliver stand-alone power systems based around solar and batteries that will deliver big savings to all consumers.

The supply of electricity to remote and rural areas, via some 900,000 of kilometres of poles and wires under schemes such as the original rural electrification programs, was an important but immensely costly exercise to deliver electricity to as many people as possible.

It involves huge cross-subsidies paid by consumers in more heavily populated areas, and while networks and stand alone power suppliers have acknowledged that off-grid supplies would be a cheaper, cleaner and more reliable solution for some time now, the archaic rules of Australia’s electricity market did not allow it.

That may finally change following a review and recommendations from the Australian Energy Market Commission, which says cutting hundreds or even thousands of kilometres of poles and wires, and replacing them with stand alone systems featuring a mixture of solar, batteries and diesel back-up would be both cheaper and cleaner.

And, the AEMC says, it would also be safer and more reliable, because of the reduced impact of storms, bushfires, floods and the like.

The AEMC has had a look at the issue previously, but rejected a Western Power application in 2017, mostly due to legal technicalities. But it asked the COAG energy council to ask it (the AEMC) to perform a review of the law and to recommend changes (that’s the way things work in this country), and this is the result.

It’s a significant change. It is a further tangible breakdown of the old centralised energy system that held that supplies should be centralised and networks extensive.

That worked for the fossil fuel industry, but the emergence of solar, storage, smart management systems and other distributed energy resources – and the transition of the consumer to a pro-super that can supply some or even all of their own power – as individuals or as groups and communities – is hugely significant.

The AEMC says its feedback to date has been the most overwhelmingly positive it has ever received, a sign of the pent-up frustration over the issue from networks, system providers, customers and local government, and the opportunities that new technology presents.

AEMC chief executive Anne Pearson told RenewEconomy in an interview on Wednesday that while the numbers of customers identified for “transition” to stand alone systems by local networks over the next•10 years is “relatively low” – see graph above – the potential savings – because of the extreme cost of connecting and maintaining poles and wires – would still deliver “significant cost savings” across the board.

“This is one of the rare win-wins for everyone,” Pearson told RenewEconomy. “It is a win for DER (distributed energy resources such as solar and batteries), a win for people who want cheaper power, and for people who want safer power.”

These systems can range in size to supplying a single bore pump to a micro-grid covering a whole town. And it is highly likely, RenewEconomy believes, that given the falling cost of solar and storage,. and rapid improvements in management systems, that the number of consumers that could benefit from stand alone system would be far greater than imagined here.

One study in 2016, for example, pointed to some 40 mid sized towns – some not on the edge of grid at all – that could benefit from cost reductions if they cut the cord to the central grid and had their own renewables-based micro-grid.

That might be too much, however, for the incumbent utilities to contemplate, even if Western Power envisages a “modular” grid where many of its consumers operate on a stand alone system, and some with only a “thin” connection.

Western Power points out that many of its customers who could benefit from stand alone power systems actually live close to major population centres, but because of the ageing infrastructure stand alone power systems make sense, cutting costs by more than 50 per cent.  For more than 2,700 customers, the savings are 80 per cent.

Two years ago, Western Power argued that it could save $400 million through such a scheme. “This is as close to a ‘no brainer’ as we can get,” said Andrew Dillon, the then interim, and now current CEO of Energy Networks Australia, which teamed up with the Alternative Energy Association and the Public Interest Advocacy Centre to try to encourage regulators to come to the party.

In Queensland, the networks estimate that stand alone power systems are more economic when replacing poles and wires of more than 4kms per customer.

Essential in NSW says that it costs up to $25,000 per customer, per year, to clear vegetation in some areas, and it also notes that one 1,905km line serves just 335 customers. Just imagine how many lines service less than one customer for every kms.

“We know there are some sites ready to go,” Pearson says, “these are the poles and the kilometres of the wires that we don’t need, because of high costs or safety issues. We can make this happen.”

Actually, there is still a bit of legal and policy work to do. The rules need to be okayed by the COAG energy council and then go through the laborious process of actually being change, but it could all be in place by early next year. In the traditionally glacial pace of regulatory change in Australia, this is a fast-flowing river.

And it may not stop there. A second leg of the project will look at helping new communities, such as housing divisions, which do not want to connect to the grid in the first place, again in recognition of the plunging cost of both solar and battery storage.