US solar inverter and battery storage products company Enphase Energy says orders for the its first battery storage products are running at double its own targets, indicating huge interest in the “early adopter” market that will flow through to the broader market, just as rooftop solar has done over the last few years.
Enphase Energy has chosen Australia as the first market to launch its modular battery storage products – which is based on a “stackable” 1.2kWh module.
“The initial response has been very strong,” president and CEO Paul Nahi told RenewEconomy during a visit to Australia last week.
Nahi says there is no doubt that the market is moving from solar-only installations to “energy systems” that will combine rooftop solar PV, battery storage and load controls.
And it will happen first in Australia, thanks to its high rate of solar uptake, and its high electricity costs, not to mention good sunshine.
“Australia is a more mature solar market and undergoing a tremendous transition, it is well ahead of most other markets in the world,” Nahi said.
“The global launch of our home energy management in Australia is because the market is here now. Now, being the tip of the spear also means you are going to encounter challenges before anyone else does, and it is not going to be a seamless transition.
‘That it is happening first in Australia is thrilling, that the market is so bright and ready for this next generation grid is exciting, but it will be a bumpy road.
‘My hope is that we can take this learning and … export it to the rest of the world and very quickly move towards that next generation grid and the decarbonisation which is essential to the economy and to the plant.
“It cannot happen fast enough. And it is happening right here.”
Nahi says of the technology that early adopters, those buying the systems now, will “play with it”, but “what we want to get to is a point where people can flick on a switch, and they find it’s cheaper (than current options).
Giles Parkinson is founder and editor of One Step Off The Grid, and also edits and founded Renew Economy and The Driven. He has been a journalist for 35 years and is a former business and deputy editor of the Australian Financial Review.
This post was published on May 23, 2016 2:08 pm
An update on how Victoria's State Electricity Commission is rolling out their one-stop-shops for home…
In our final episode for the year, SunWiz's Warwick Johnston on the highs and the…
Regulator report finds that little-understood but increasingly common demand tariffs can add up to $800…
Have you heard the one about non-solar homes paying the cost to networks of accommodating…
Four good quality solar panels - costing around $500 - would produce enough power for…
The gas war still burns: “We need to think about how to stop misinformation going…
View Comments
Enphase has a smart solution. I have Enphase inverters on my panels, and
they work. Their current price gets me to about $0.08/kWh based on
full draw and daily cycling for the warranted lifespan. This is really close to
penciling out for me, and I expect that I will be buying in a year or
two. As I do not expect to use the entire capacity on a daily basis, and
I will not have excess power every day, I need the cost per kWh/cycle
to get a little lower before buying in.